7 Days To Die Console Commands & How to Use

Below the 70 cheats & console commands that we have given you, are all up to date, easy to use, and can work on Steam and non-Steam versions of the game for both PC and Mac.

Apart from providing an updated list of 7 Days to Die cheats or console commands, we will also explain how you can use them. Let’s dive in.

How to Use Console Commands in 7 Days to Die?

To enter console commands in 7 Days to Die, there are two different methods you can use. The game console can be accessed on both single and multiplayer servers. Depending on your keyboard layout, you can access the game console using one of the following keys. Type in the command and press ENTER to activate it.

–1st Method:

  •   F1 for the US and Europe Keyboards

–2nd one:

  • Press ” [Quotation marks] for US keyboards.
  • Press @ [At” sign] for EU keyboards.
  • Press Ö/Ø/F2 for Scandinavian keyboards.
  • Press Ñ for Spanish keyboards.

7 Days To Die Cheat Mode

Cheat mode is also an option available in 7 days to die. This option lets you control whether players will have access to the Creative Menu in the game or not. If enabled, players will be able to select and place any item available from the Creative Menu. To open a Creative Menu in 7 Days to Die, follow the below steps.

  • Press the U key.
  • In order to enable and disable God mode press the Q key.
  • In order to enable and disable Flying press the H key. While Flying, press Space to go up and C to go down. You can fly faster by pressing and holding Shift.

Fly Mode has not been made a part of the console, just PC only at the moment.

7 Days to Die Console Commands

Below is the list of all 7 Days to Die cheats & console commands.

NameSyntaxDescription
giveselfgiveself [item id] [quality level (1-6)]This console command allows you to give yourself the specified item using the specified quality level.
buffbuff [buff id]This command helps you to apply a buff to a local player that may be you.
debuffdebuff [buff id]This command is used to remove a buff from the local player or yourself.
buffplayerbuffplayer [steam id / player name / entity id] [buff id]You can use this command to apply a buff to any particular player by specifying his id in the syntax.
debuffplayerdebuffplayer [steam id / player name / entity id] [buff id]You can use this command to remove a buff from any particular player by specifying his id in the syntax.
switchviewswitchviewThis command will switch the player view between 1st person and 3rd person views. This can also be done in debug mode.
systeminfosysteminfoThe system info console command will print info about the current system CPU or operating system.
debugmenudebugmenuThis is a toggle command that is used to on or off the debug mode. You can specify in the syntax whether you want to be on or off the mode.
exhaustedexhaustedThe exhausted command will result in making the player exhausted.
giveselfxpgiveselfxp [xp amount]You can give yourself the XP by using this command. You have the option to specify the amount you need to have.
creativemenucreativemenuThe creative menu command is used to enable or disable the creative menu.
spawnsupplycratespawnsupplycrateThis command helps you to spawn a supply crate above the player.
adminadmin [‘add’ / ‘remove’ / ‘list’] [steam id / player name / entity id] [permission level]The admin command is used to manage the user permission level. You can add or remove the player from the admin list.
kickkick [steam id / player name / entity id] [“kick message”]You can kick any particular player from the game using this command. You can specify the player id to kick him out.
kickallkickall [“kick message”]The kickall console command is used to kick all the players from the game.
whitelistwhitelist [‘add’ / ‘remove’ / ‘list’] [steam id / player name / entity id]You can add or remove any particular player in the white list with the help of a whitelist by specifying the parameters in the syntax of the command.
banban [‘add’ / ‘remove’ / ‘list’] [steam id / player name / entity id] [duration + duration unit] [“message”]The ban command is used to manage the ban list. You can ban or unban any specified player in the game.
killallkillallThe killall command will kill all the players and entities out there in the game.
teleportteleport [steam id / player name / entity id] [x y z] [offset x y z] [view direction]You can teleport yourself to any desired location in the game with the help of the teleport console command.
teleportplayerteleportplayer [steam id / player name / entity id] [steam id / player name / entity id] [x y z] [view direction]This command helps you to teleport the target player to a specified location by specifying the player id and targeted location in the syntax.
showcloudsshowclouds [texture file name]This is an artist’s command. It is used to show one layer of clouds.
repairchunkdensityrepairchunkdensity [x z] [‘fix’]This command is used to check if the densities of blocks in a chunk match the actual block type. If there is a mismatch it can lead to the chunk rendering incorrectly
weatherweather [weather setting]The weather command is used to manage the weather setting within the game. You can change the weather type using this command.
weathersurvivalweathersurvival [‘on’ / ‘off’]This command helps you to enable or disable the weather survival mode.
spawnentityspawnentity [player id] [entity id]The spawnentity console command is used to display a list of entities that can be spawned.
spawnwanderinghordespawnwanderinghordeYou can summon a wandering horde of zombies using the spawnwanderinghorde command.
givequestgivequest [quest id]By executing this command, you can give yourself a quest. You can specify the quest id in the syntax.
removequestremovequest [quest id]You can remove any particular quest from the game with the help of this console command.
saysay [“message”]The say command will send a server message to all connected clients.
cpcp [‘add’ / ‘remove’ / ‘list’] [command] [0 – 1000]This command is used to add a command to the command permission list with the desired permission level.
listplayerslistplayersThis console command will list all the players with IDs, positions, health, stats, and IP address.
versionversionBy executing this command, you can print the currently running version of the game and load mods.
water limitwater limit [amount]The water limit console command is used to control the flow of water in the game.
thirstythirstyThe thirsty command will result in making the player thirsty.
spectrumspectrum [spectrum id]The console command will force a lighting spectrum. You can specify the id of your desired light spectrum.
gettimegettimeThe gettime command is used to print the current number of days and times.
spawnscoutsspawnscouts [steam id / player name / entity id] [x y z]The spawnscouts are used to summon you any particular screamer. The distant screamer will come right in front of you after executing this command.
listentslistentsThe listens command will list all the zombies, players, and animals out there in the game.
shutdownshutdownIf you want to shut the game down then you can use this console command
spawnairdropspawnairdropThe spawnairdrop console command is used to spawn an airdrop.
staticmapstaticmapThis command will switch the Navazgane map between static and dynamic.
listplayeridslistplayeridsYou can list all the players and their ids using this console command.
setgamestatsetgamestat [game stat] [value]This command helps you to set any game statistic to your desired value. You can specify the game stat and required value in the syntax.
getgamestatgetgamestat [string]You can use the getgamestat console command to print the list of current game stats to the console.
setgameprefsetgamepref [game preference] [value]The setgamepref command is used to set the game preference to your desired value. You can specify the game pref and value in the syntax.
getgameprefgetgamepref [string]This command is used to print the list of current game preferences to the console.
starvestarveThe starving player will result making the player hungry.
settempunitsettempunit [c / f]This console command is used to set the temperature unit to Celsius or Fahrenheit.
memclmemclThe meal command will print the memory information on the client and calls the garbage collector.
memmemThis command will result in printing the memory information and calling the garbage collector.
traderareatraderareaThe trade is the command that will show you all the trade areas in the game.
exportitemiconsexportitemiconsThis console command is used to export all the item coins to the game folder.
lightslightsThis is a toggle command used to turn on or off the light around the light-emitting objects.
shownexthordetimeshownexthordetimeThe shownexthordetime helps you to display the wandering horde time.
pplistpplistThis console command will print the persistent player data.
clearclearThe clear command will help you to clear all output text in the command console.
listthreadslistthreadsYou can execute the listthreads console command to list the threads.
spawnscreenspawnscreenThe spawnscreen command will display the spawn screen.
showalbedoshowalbedoThis command will hide or unhide the albedo in the buffer.
settimesettime [‘day’ / ‘night’] [0-24000] [d hh mm]You can set the game time with the help of this command. You can specify the time of day or night in the syntax.
helphelp [command]The help command is used to print the help text for supported commands.
sounddebugsounddebugThe sounddebug is a toggle command that is used to enable or disable the SoundManager debug output.
shownormalsshownormalsThis is a toggle console command used to show or hide the normal maps in the buffer.
loggamestateloggamestate [header] [true / false]The loggamestate command will write the information on the current state of the game.
chunkcachechunkcacheThis console command is used to show all the loaded chunks in the cache.
loglevelloglevel [log level] [true / false]This command will enable that which types of log messages are shown on the connection. You can disable it using the same command.
saveworldsaveworldYou can save the world manually by executing this console command.
showchunkdatashowchunkdataThe showchunkdata command is used to show some data of the current chunk.
aiddebugaiddebugThis is a toggle command which helps you to enable or disable the AIDirector debug output.
showspecularshowspecularThe showspecular is used to enable or disable the display of specular values in the buffer.