How To Reset SteelSeries Arctis 1 Headset (Factory Reset) 2024

Simple and easy steps to rest your SteelSeries headset.

Do you want to reset SteelSeries Arctis 1 headset? You will need to reset SteelSeries Arctis 1 if you are dealing with its headset won’t turn on, or microphone is not working. In case the Arctis 1 headset keeps disconnecting or won’t pair with devices then it’s a best step that you can take.

If you are thinking about contacting their support to return it wait here we have solution that will help you get rid of any issues.

First check the following things before you reset SteelSeries Arctis 1

  • Check the charging cable if its damaged or not. Also check the USB port that you are using is supplying enough power to charge the headset.
  • Make sure you properly turned on your headset.
  • Make sure your headset is fully charged, because sometimes when the battery gets lower so your headset won’t turn on.

How to Reset SteelSeries Arctis 1 Headset?

There are few ways to reset the SteelSeries Arctis 1.

Option 1. Try Soft Reset

One way is to simply unplug the USB cable from the headset and then plug it back in. This will cause the SteelSeries Arctis 1 headset to go in soft reset.

Option 2. Hard Reset

To perform hard reset of SteelSeries Arctis 1, Follow the below given step wise guide:

  • Disconnect any cable from your SteelSeries headset

If you have a wired headset, make sure that it must be disconnected from your PC. Controller or Console.

  • Gently remove cushion on the left ear cup from the mic side

In order to remove the cushion all you need to do is grab it by bottom and pull down if you flip the headset over. You’re noticing the lining is coming loose from the headset. Once you see that go ahead and pull the cushion all the way up.

  • Locate the reset button on SteelSeries Arctis 1

On the left side of the headset (the side with the microphone), there is a reset switch under the pin hole.

You can locate the press button by using paperclip, then press and hold it for 1 second.

Once you’ve reset the headset, Charge it for the 10 minutes and then try to On it back.

What To Do if SteelSeries Arctis 1 Reset Button is Not Working

If its not working then you make sure that you have located it on the exact location. You can find reset button on the left side of the headphone and right next to the microphone.

Use pin as the whole is very tine, and press button located inside the pinhole. The reset button may be dislocated from the location. You can open the headphone and reset the location and press it.

The wiring problem and battery issues can also add up in this problem. In such case you can call the expert or contact their customer support page.