How To Fix PS4 Error CE-43461-8: PlayStation Update Error

Can't update PS4 instead encounter CE-43461-8 error code. Here is how to fix it?

Getting the PS4 error code CE-43461-8 can be pretty annoying, especially when you’re just trying to update your console. This error usually pops up right at the end of the PS4 firmware update process and often has something to do with issues in the internal hard drive.

To help you out, we’re going to break down what might be causing this error and give you easy steps to fix PS4 error ce-43461-8. So, let’s make sure you can get your updates without any hiccups!

Read Also: How To Fix PS4 Won’t Connect to WiFi But Everything Else Does

What Causes CE-43461-8 Error on PS4?

When you see an error has occurred (CE-43461-8), you can blame one of the below causes:

  1. Update Glitch in Notification Queue
  2. Corrupted Database
  3. Firmware Update Installation Issue
  4. Inconsistency with PS4 Hard Drive
  5. System File Corruption

How to Fix PS4 Error CE-43461-8 – PlayStation Error

Apply these fixes as one of them will surely help you solve PS4 error codes.

1. Remove the Faulty Firmware Update

The simplest way to address the “PS4 an error has occurred CE-43461-8” issue is by removing the faulty firmware update from the notification queue. Follow these steps:

  1. Navigate to the Home page and access the dashboard on your PS4 by pressing up with your thumbstick. Open the Notifications icon by pressing the X button on the console.
  2. Enter the Delete mode in the Notifications menu by pressing the Triangle button. Choose the entry linked to the problematic firmware update and press X.
  3. After selecting each notification, press X on the Delete button and confirm the operation. Make sure there are no pending firmware updates left in your Notifications bar.
  4. Restart your PS4 console and check if the CE-43461-8 error code is resolved during the next startup.

2. Install Software Using Safe Mode

If the above fix didn’t work for you. Then you need to update the software using Safe Mode. To do this follow the steps below.

  • Turn off your console and then hold down the power button for around seven seconds until you hear two beeps.
  • Connect your DS4 controller using the provided USB cable.
  • Then press the PS button to access Safe Mode.
  • Select “Update System Software” and follow the on-screen instructions.

3. Rebuild PS4 Database

If you’re facing the PS4 error CE-43461-8, especially in conjunction with Blu-ray issues following a failed update, a corrupted database may be the culprit.

To address this, consider rebuilding the PS4 database using the Recovery Menu in Safe Mode.

Tip: Given that this process may deal with file corruptions related to the CE-43461-8 error, it’s advisable to back up your saved game data to the cloud.

  1. Turn off your console completely by holding the Power button.
  2. Allow some time for the console to power cycle.
  3. Hold the Power button again until you hear a second beep. Release the button, and your console should enter Safe Mode.
  4. In Safe Mode, connect a DS4 controller using a USB cable and press the PS button.
  5. Choose the Rebuild Database option from the Safe Mode menu and press X.
  6. Once completed, you’ll be prompted to restart conventionally.

Now, check if the “PS4 an error has occurred CE-43461-8” message persists.

Read Also: How To Fix Steam Not Detecting PS4 Controller On PC

4. Install the Pending Firmware Manually

If the pending update doesn’t run automatically then you need to install it manually using the USB device.

  • First, grab a USB device and format it to the FAT file system.
  • Now create a folder namely PS4 and inside it again create a folder UPDATE using all Caps.
  • Visit the official website and download the update in question on the USB device.
  • Now access to the PS4 Safe Mode.
  • Connect the DualShock4 controller using a USB cable and press the PS button.
  • From the menu choose Update System Software > Update from USB Storage Device

Follow the onscreen instructions when the update is installed in PS4 it will restart.

5. Reinstall the Internal Hard Drive

If none of the previously mentioned methods have resolved the issue, it’s possible that the problem lies with your internal hard drive. Some users who faced similar problems reported success by reinserting their internal hard drive.

If this step doesn’t yield positive results, it could indicate a failing HDD, necessitating a replacement HDD/SSD.

If you suspect this scenario applies to your situation, follow the instructions below to reinstall the internal hard drive on your Vanilla PS4, PS4 Slim, or PS4 Pro:

  1. Turn off your PS4 console conventionally. Ensure it is fully powered off, not in hibernation. Once off, disconnect the power cord from both your console and the power outlet.
  2. Remove the hard drive cover from your PS4 console and take out your HDD. Note that the instructions for doing so may vary depending on your PS4 version. Here are instructions for the standard version of PlayStation 4 and each revision:
    • Replacing / Reinserting Hard Drive on PS4
    • Replacing / Reinserting Hard Drive on PS4 Slim
    • Replacing / Reinserting Hard Drive on PS4 Pro
  3. After successfully reinserting or replacing your PS4 console’s hard drive, attempt to install the pending update once again and check if the issue is resolved.

If you’ve already performed this step without success, proceed to the next potential fix outlined below.

Read Also: How To Fix PS4 Controller Won’t Turn On Or Charge

6. Initialize PS4 Console

If the previously mentioned solutions prove ineffective, you may need to initialize your PS4 console. Don’t worry; we’ll guide you through the process without any data loss. Follow these detailed steps:

  • Log in to your PSN account where you store all relevant data.
  • On the dashboard, select the Settings icon, then navigate to Application Saved Data Management > Saved Data in System Storage.
  • Choose Upload to Online Storage and press X. Press Options on your controller, select Choose Multiple Applications, pick the games you want to preserve, and click on Upload/Copy to copy them to the cloud or an external drive.
  • Turn off your PS4 console and wait for some time. Then go back to the Settings menu and select the Initialization option.
  • In the Initialization window, choose the Initialize PS4 option.
  • After the initialization is complete, go to Settings > Application Saved Data Management > Saved Data in Online Storage.
  • Follow the on-screen prompts to download the data you backed up. If you used a USB drive for backup, select Saved Data on USB Storage instead.